Changelog
1.7.3.0
- DO NOT UPDATE IF YOU ARE NOT USING 4.38_U2
- What's New:
- Falcon BMS 4.38_U2 Compatibility
- Updated the plugin to support Falcon BMS 4.38_U2, including all required compatibility changes.
- Added support for the Mideast128 theater. Please note that this theater is not yet fully supported
- by BMS itself.
- Enhanced Voice Recognition & Audio
- Selectable Speech Engine: You can now choose which Windows speech engine to use for voice commands.
- The plugin uses your default Windows speech engine by default, but alternative engines can be
- selected directly from the Config Form.
- Voice Audio Realism: Added an option to introduce static noise to voice output, giving radio
- communications a more authentic feel.
- ICP Command Protection: Added an ICP command blocker to prevent multiple ICP commands from executing
- simultaneously and potentially interfering with each other.
- Enhanced Day/Night Configuration
- You can now configure day/night conditions using the sun's actual position, providing a more realistic way
- to determine lighting conditions.
- Adding config Startup option to set DED Off Hud.
Fix and Improvements:
- SMS Fix: Fixed an issue affecting SMS Single and Pair mode operation.
- Improved Command Handling & Reliability
- Improved Phrase Management
- Reduced clutter in the Phrase Filter and Phrase Form by removing long lists of airport names from related
- commands. Instead, commands now use dynamic airport lists (e.g. "Say distance to nearest [airportList]"),
- making phrase management cleaner and easier to navigate.
New Commands
- > Display Previous Search Results: You can now bring up your previous document search results again without
having to repeat the search: [show; open; display] search [result; results]
- > Commands to enable/disable the comms menue:
disable [comms;radio;comm]menu
enable [comms;radio;comm]menu
1.7.2.1
1.7.2.0
- This version brings a major expansion of SkyGuard, turning it into a significantly
- more capable in-flight mission and tactical assistant.
- SkyGuard is now faster, more configurable, and able to retrieve and build important
- mission information while you are already in the cockpit.
- New DataCard and briefing can be pulled from game data - same as WDP but during flight!
- Forgot to create your DataCard or briefing before launching? No problem.
- SkyGuard can now pull the required information directly from the game while you are flying.
- It can generate:
DataCard information
Mission briefing
Package information
Package route
Route displayed directly on the map
- This provides functionality similar to WDP, but available during the flight.
- Important: You must be in the cockpit for SkyGuard to retrieve the required game data.
- You can also auto show the dataCard in OK - use config form option to set this.
- Configure the Red Team:
- You now have full control over how SkyGuard identifies the opposing side.
- From the Plugin Configuration form you can:
Configure the Red team for each theater
Identify the Red team by country name
Identify the Red team by color code
- Select Which Ground Threats to Search
- Ground-threat searches are now much more flexible.
- You can select which types of ground threats SkyGuard should consider, allowing you to focus searches on exactly what matters to you.
- For example, you can choose to search specifically for:
SAMs, AAA, SHORAD, Air Defense, Other configured ground-threat categories
- This makes threat searches faster, cleaner, and much more useful in tactical situations.
- New DECLARE Command
- Introducing a new DECLARE capability for designated targets.
- When a target is designated, SkyGuard will:
- Create a new MARK page entry at the designated position.
- Search for the appropriate target around that position.
- Use a configurable search radius.
- Report the target found within that area.
- The search radius can be configured directly from the Plugin Configuration form.
- This provides a much more natural workflow when working with designated locations and tactical references.
- Adding option to enable SkyGuars in MP. Note that this may not be allowed on all multiplayer servers.
- You can now select which ground threats types to target when you search for threats.
- Adding a new command to 'Declare' designated target. this creates a new MARK page entry and search for a tager withing a given radii arounf the MARk position.
- Use teh Config From to define the search radii.
- You can now use a single tab in OpenKneeboard to show all related JanJan command apart from the Search for phrases command.
- Update plugin doc.
- Added an option to reduce select which countries are included when the plugin searches for airports and airbases.
- This affects commands that use a specific theater location, such as 'say distance to RAMON runway'.
- Selecting fewer countries reduces the number of phrases the plugin creates and lowers its memory usage.
- Reduce keypress timiw for all commands.
- Adding an option to ignore Airstript when using runway related commands.
Fixed:
- Flashlight not turning on/off during startup - fixed
New Commands
- You can view your last saved screen shot taken by BMS, in OK, using the command:
- > [openkneeboard;open kneeboard;open knee board] show [screenshot;snapshot]
- You can ask the plugin for the nearest available tanker regardless of AWACS presence.
- > [say distance;say vector][to;][nearest;closest]tanker
- Or even store the tanker Tacan and radio frequency using:
- > [get;store][nearest;closest]tanker
- Creating dynamic DataCard/Briefing during flight
- > [generate;create;update][datacard;data card]
- Show the new datacard:
- > [openkneeboard;open kneeboard;open knee board]show[briefing;datacard;data card][tab;]
- Hide the briefing, which will hide OK (similar to hide Ok command) with
- > Hide briefing
- Generate new full theater map with all available data. This will create a new theater map in the OpenKneeboard folder.
- > [genrate;create;update][theater map]
- You can switch to selected runway backup frequency:
- [switch;switch to;change to;set;tune] backup [approach;departure;tower;ground;atis] frequency
- [set;select] [config;] cat 1
- [set;select] [config;] cat 3
1.7.1.7
- Add support for Falklands theater.
- Support Negative Lat/Long coordinates when reading BMS data.
- Updating SkyGuard to support Falklands theater.
- Note that none of the command to enter Lat/Long coordinates in Falklands theater will work untill BMS is updated to fully support S/W coordinates.
- Fixed wrong key cammnad categories in Phrase Form.
- Adding tooltips for more commands in the Phrasae Form
- SkyGuard now checks if own plane is in the center of the map when showing threats - it compares own callsing to the closest target callsign.
- Adding ATIS frequencies to theater data and adding vocal command to set ATIS frequency.
- Modified startup sequence.
- Fixed CMDS Config tab checker.
New Commands
- Added command to set time scale normal. This is based on the previous 'move time accelerate commands.
- > [move;set] time [scale;] normal
- New commands to set/tune COM2 ATIS frequency
- > [set com 2; tune com 2;set;tune][to;][airportList][atis]
- > [switch;switch to;change to;set;tune][atis]frequency
1.7.1.6
- Fixed Phrase From font color too dark.
- Backing up files, in Utils Tab, now removes old backup files, which can cause problems when restoring.
- Added more phrases to JTAC commands. [jtac;j tac;jay tack;j tag]
New Commands
- Added JTAC coordinate auto-entry. E.g. if your JTAC gives you coordinates like this:
North 4 0 / 3 7 / 7 8 2
East 0 2 1 / 0 3 / 3 8 8
The plugin can reads the latest _log file, extracts the most recent coordinates, and enters them automatically.
It will ignore entries older then 2 minutes. You can set the max time to ignor in the Config Form.
BMS Debug MUST be on for this to work.
> [enter;set][jtac; j tack; jay tack; j tag][position;coordinates;coords]
Example for usage: "enter new nav point 15" followed by "enter jtac position"
> [replay;restart][song;music]
Settning "SimParkingBrakeUp" which running "Initiate Shutdown sequence" command.
1.7.1.5
Modified SkyGuard to support "Hellas WPC"
Some commands were not running when sim is pauses or not in the pit - fixed now.
Fixed select IntraFlight page not working for some blocks.
Fixed SkyGuard for HTO theater not showing ground threats and attack threats.
Plugin will use Tower frequency for setting radio commands in case airport has only Tower frequency
Plugin now has a dedicated log to show only errors and warnings. This will help to debug issues without having to go through the entire log.
Fixed wrong text for StartUp Fuel Transfer Switch option in the Config Form.
Updated tooltips and help text in the Config Form.
New Commands
>Added phrase to "set backup frequency" command to specify [approach;departure;tower;ground;]
>set [left;][throttle;] idle detent [position;][back;off;idle;cutoff; to cutoff]
>set [left;][throttle;] idle detent [position;][forward;on]
1.7.1.4
Important: The plugin has been updated to use magnetic heading instead of true heading for ILS.
If you are using your own theater data, you will need to regenerate it so it matches the new magnetic‑based system.
The theaters KTO, ITO, and Balkans included in this version already use the updated data.
Hellas does not, so it must be regenerated manually by the user.
Modified Config Form startup elements order.
Fix issue with the Delete-Music command not working properly.
Updating config form.
Adding config option to set SimHUDBrt to day/night/auto during startup.
Fixed wrong call backs.
Letting a use specify Max # of Air/Ground threats to show in SkyGuard.
Update Lightning Panel startup knobs steps to 11 levels (0-10), apart from Primary Data (0-6)
Adding Naval threats to SkyGuard theater data. User can now search for naval threats and store them as nav points.
naval threats are not shown on the map.
New Commands
>Vocal command to change HDR tone map: [set;tune][HDR;H D R;][tone;][map;mapping][0..9]
>Vocal command to recenter joystick [recenter;center][joystick;stick]